This NEW RYOBI Tool is FLYING Off the Shelf at Home Depot
New tools have been showing up all year, and several of the ones covered here have never been on this channel before. This list rounds up 10 of the standout releases so far in 2026 across drills, batteries, measuring tools, and shop accessories.
Highlights include the Makita 40V Hammer Drill with its built in torque display, the new RYOBI EDGE battery lineup, and a real decibel test on the RIDGID NUKE Stealth Force Impact Driver. There is also a new Bosch plunge router, a Kreg pocket hole machine on a cordless platform, and a blade cleaning kit that brings dull looking blades back to life.
New Tool Releases Worth Knowing About in 2026
1. Makita 40V XGT Hammer Drill With a Built In Depth Stop
This hammer drill sits on the Makita 40V XGT platform, which Matt has tested before through the brand's track saw and router. It is a three speed drill with drill, screw, and hammer modes selectable right on top.
Switching to screw mode lights up an LED screen on the base where torque can be set with a small dial, a layout Matt has not seen on another drill. It also includes a wide, bright LED work light and a sliding depth stop rod that can be locked in place for drilling consistent hole depths over and over.
One feature Matt notes is missing is anti rotation control, which some competing drills include, though he calls it a nice to have rather than a must have.
See the Makita 40V Hammer Drill at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
See the Makita 40V Hammer Drill Kit at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
2. Makita 40V XGT Sander and Track Saw for the 40V Lineup
Matt has tested several tools on the Makita 40V XGT platform, including the track saw and router, and considers the platform to be one of Makita's strongest cordless lineups. The sander and track saw shown here round out that same 40V system.
Because these tools share the same battery platform, anyone already invested in Makita 40V XGT tools can add either one without needing separate batteries.
See the Makita 40V Sander at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
See the Makita 40V Track Saw at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
3. RYOBI EDGE 4Ah, 8Ah, and 12Ah Batteries for More Runtime
RYOBI has expanded its EDGE battery platform to now include 4Ah, 8Ah, and 12Ah options, all built on tabless cell technology. Matt notes a major difference in power output when using EDGE batteries compared to standard RYOBI batteries.
More capacity options mean users can match battery size to the job, whether that is a quick task or an extended run time need on a bigger project.
See the RYOBI EDGE 4Ah Battery at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
See the RYOBI EDGE 8Ah Battery at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
See the RYOBI EDGE 12Ah Battery at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
4. RYOBI 18V Whisper Series Hybrid Fan for the Shop
This hybrid fan can run on RYOBI 18V batteries or plug into a standard extension cord, so it works even without RYOBI batteries on hand. Matt uses his hanging on a RYOBI link wall in his home gym in the mornings or while riding an exercise bike.
It is also portable enough to take camping or use outdoors, making it a flexible option beyond just shop use.
See the RYOBI 18V Hybrid Fan at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
5. RYOBI 18V Planer for Edge Work and Chamfers
This 18V hand planer adjusts depth down to 5/64 of an inch and includes an edge guide for straighter passes. A switch on the bottom lets you choose which side the chips eject from, which is handy depending on your working position.
V grooves on the base allow for different edge profiles, including a chamfered edge, and dust collection performed well in testing with no dust escaping and the bag filling with the expected wispy shavings.
See the RYOBI 18V Planer at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
See the RYOBI 18V Planer Kit at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
6. RYOBI 18V 30th Anniversary Black Drill
This limited edition drill comes in an all black colorway to mark RYOBI's 30th anniversary. Matt calls it one of his favorite RYOBI releases in recent years, mainly for the look rather than any new function.
Since it was released in limited quantities, availability may be inconsistent depending on when you check.
See the RYOBI 18V Black Drill at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
7. Milwaukee M18 Blower for Shop Cleanup
This compact blower includes three interchangeable tips to help direct airflow and three selectable speeds, plus a variable speed trigger. A replaceable filter on the back can be cleaned or swapped if it gets clogged.
It is handy for blowing sawdust off a bench or out of freshly drilled holes, and it also works for clearing water from door handles or headlights during car detailing, and for inflating items like pool floats.
See the Milwaukee M18 Blower at Home Depot Affiliate link. We may earn a commission at no extra cost to you.
8. Fastback Story Pole Tape Measure for Repeat Measurements
Fastcap is one of Matt's favorite tape measure brands, and this story pole version builds on that reputation. It has the same clip, pencil sharpener, and writable surface as other Fastcap tapes, with markings laid out in sixteenths for easy reading.
What sets it apart is the blank story pole section along the bottom, which lets you mark a measurement directly on the tape and repeat that same length across multiple pieces without needing to read a number. The mark erases easily with a finger when you are done.
Matt says this tape measure might take over as the best one in his shop.
See the Fastback Story Tape Measure at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
9. Fastback Lefty Righty Tape Measure for Easy Reading
This tape measure can be flipped either direction and still reads upright, which Matt notes is popular even among people who already know how to read a standard tape. It also has sixteenth inch increments marked out clearly.
Matt calls it one of the most popular tape measures he has ever featured on the channel, since it helps prevent marking the wrong measurement line by mistake.
See the Fastback Lefty Righty Tape Measure at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
10. RIDGID NUKE Stealth Force Impact Driver Noise Test
Matt has owned RIDGID power tools since 2017, starting with the Gen 5X platform, and has even used the brand's lifetime service agreement to get a burnt up router repaired at no cost. This new Stealth Force impact driver is part of the RIDGID NUKE subcompact lineup and uses oil pulse technology, which RIDGID claims runs up to 73 percent quieter.
In a side by side decibel test against a previous generation RIDGID subcompact driver and a Milwaukee M12 impact, ambient talking measured around 75 decibels, the previous RIDGID model measured around 103 decibels, and the new NUKE measured around 94 decibels. It also includes three speed settings plus an automatic hammer mode that ramps up power as needed, and it is slightly shorter than the previous generation model, which helps in tight spaces.
See the RIDGID NUKE Stealth Force Impact Driver
More New Tools Featured in This Video
Kreg Rebel Cordless Pocket Hole Machine
The Kreg Rebel is a pocket hole machine built on Kreg's new Ionic Drive cordless platform, designed for repeatable pocket holes without needing to reset the machine each time. Matt calls it a game changer for anyone doing pocket hole joinery regularly.
See the Kreg Rebel Pocket Hole Machine at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
Kreg HEPA Shop Vac for Small Tool Dust Collection
This HEPA filtered shop vac is built for collecting dust from smaller tools like sanders and routers right at the workbench, which is especially useful in a small shop. It runs on Kreg's 20V platform and offers two speed settings, so anyone already on that battery system can add it without extra batteries.
See the Kreg HEPA Shop Vac at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
Bosch 1 3/4 HP Plunge Router New for 2026
This plunge router surprised Matt by showing up on Amazon before appearing at Home Depot or Lowe's. It features a forward leaning handle design with variable speed control positioned right at the left thumb and the power trigger at the right index finger.
An eight position turret style plunge stop offers more depth settings than most routers, which typically only offer three. The main limitation is that it only accepts quarter inch collet or shank bits, with no half inch option available.
See the Bosch 1 3/4 HP Router on Amazon Affiliate link. We may earn a commission at no extra cost to you.
Rockler Blade Clean Kit for Table Saw Blades
This blade cleaning system includes everything needed to remove sap and gummy buildup that can make a blade feel dull even when it is not. Matt used CMT blade cleaner spray along with the included brush, which has brass bristles on one side and a scrub pad on the other, to clean a heavily gummed blade in just a couple of minutes.
Two handles screw onto the blade to keep fingers away from the sharp edges, and a containment tray keeps the mess in one place for easy cleanup. The kit works on router bits as well as saw blades and folds into a compact storage case when finished.
See the Rockler Blade Clean Kit at Rockler Affiliate link. We may earn a commission at no extra cost to you.
See the CMT Blade Cleaner at Rockler Affiliate link. We may earn a commission at no extra cost to you.
Other Gear Matt Uses
A few additional items rounded out this video that are not power tools but still come up regularly on the channel. These include the mechanical pencil Matt uses for marking and layout, an analog clock in the shop, and the work clothes he wears on camera.
See the Mechanical Pencil Matt Is Using Affiliate link. We may earn a commission at no extra cost to you.
See the Blue Angels Analog Clock Affiliate link. We may earn a commission at no extra cost to you.
See the TrueWerk Work Clothes Matt Wears Affiliate link. We may earn a commission at no extra cost to you.
Want deals like these sent to you every day.
Join The Cut List — free daily tool deal email from Matt.
Browse all current tool deals at 731woodworks.com.
See all tool reviews — every post from the 731 Woodworks blog.
Frequently Asked Questions
Is the RIDGID NUKE Stealth Force impact driver actually quieter?
In Matt's test, the previous generation RIDGID subcompact impact driver measured around 103 decibels while the new NUKE Stealth Force measured around 94 decibels. That is a real, noticeable drop and matches RIDGID's claim of up to 73 percent quieter operation thanks to its oil pulse design.
What is the RYOBI EDGE battery platform?
RYOBI EDGE batteries use tabless cell technology to deliver more power and longer runtime than standard RYOBI 18V batteries. The lineup now includes 4Ah, 8Ah, and 12Ah options, giving users more capacity choices depending on the tool and job.
How do you clean a gummed up table saw blade?
A dedicated blade cleaner spray combined with a brass bristle brush can remove sap and pitch buildup without damaging carbide teeth. The Rockler Blade Clean Kit contains the spray, brush, and cleaning tray in one compact system, and cleaning a heavily gummed blade can take just a couple of minutes.
What is a story pole tape measure used for?
A story pole tape measure has a blank section along the bottom edge where you can mark a measurement directly on the tape itself. That mark can then be used to repeat the same length across multiple pieces without needing to read or remember the number, and it wipes off easily when you are done.
Does the Kreg Rebel pocket hole machine use the 20V battery platform?
Yes, the Kreg Rebel runs on Kreg's Ionic Drive cordless platform, and the companion HEPA shop vac also runs on the 20V platform. If you already own batteries on that system, both tools are ready to use without buying a separate battery setup.
Does the new Bosch plunge router accept half inch shank bits?
No, this particular Bosch 1 3/4 HP plunge router only accepts quarter inch collet or shank bits. It does not have a half inch collet option, which is worth knowing if your bit collection leans toward half inch shanks.
Prices and availability were accurate at time of publishing and may change. Always click through to confirm current pricing. Some links in this post are affiliate links. 731 Woodworks may earn a small commission at no extra cost to you.
