Christmas Village Display Tree

Christmas Village Display Tree.jpeg

Christmas Village Display Shelf. This DIY stand is used to display Christmas villages. I built this village Christmas tree stand out of plywood and 1x material. This Christmas village display shelf will require 2 sheets of 4x8 plywood, bolts, screws and 1x material. Building a tree for Christmas village is a very approachable project with just a few tools. Give this village display tree project a try! Check the links below for supplies and tools used in this build.

I cut the base 30” wide on each side. The tree is six feet tall. I cut the shelves to fit in each space. I built my own brackets for attaching each half of the tree together. By bolting the sides together, you can disassemble the tree for easier storage. Watch the video linked below to see the full details of this build.

Here is a list of tools and supplies used in this build:

2 Sheets 3/4” Sanded Birch plywood.

Kreg Rip Cut:

2" by 3/8" Bolts:

3/8" Nuts:

3/8" Flat Washer:

3/8" Lock Washer:

Edge Banding:

Kreg K5 Pocket Hole Jig:

Kreg 1 1/4" Screws:

DeWalt Variable Speed Sander:

120 Grit Sandpaper:

Titebond II Wood Glue:

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. This adds no cost to you whatsoever. It just helps support what we are doing. Thank you for the support!

Tools and supplies we recommend and use:

Disclaimer: Amazon affiliate links are used in this description and they help support this channel. By clicking on the links and purchasing items through Amazon, provides me a very small commission but cost you nothing extra. It is a great way to support small creators like me. I appreciate the support more than you know!