WEN 10 Inch Band Saw Lowest Price Ever: $229.34

A bandsaw is the machine that unlocks work no other saw in the shop can do, and the entry price just dropped to the lowest it has ever been. The WEN 10 inch two speed band saw with stand is at $229.34, well below the $353.64 it has averaged over the last 90 days. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the WEN 10 inch band saw at its lowest price ever

Final Price Breakdown

• 90 day average price: $353.64

• Current price: $229.34

• You save: $124.30

• Percent off average: 35%

• Lowest price ever recorded

• Deal expires: limited time only

Why This Tool Is Worth It

A bandsaw does things a table saw physically cannot. It cuts curves, it resaws thick boards into thin panels, it breaks down rough or irregular lumber safely, and it handles small parts without the kickback risk that makes a table saw dangerous on narrow pieces. For a lot of woodworkers, adding a bandsaw is the single biggest jump in what their shop is capable of.

The 3.5 amp motor here gives you six inches of cut depth, which is the number that matters most. Six inches of resaw capacity means you can take a thick board and split it into two thinner boards, or slice your own veneer and book matched panels. That is how you turn one expensive piece of figured hardwood into two matching faces for a cabinet door or a box lid. It is also 9 3/4 inches of throat width, so you can bring a decent sized workpiece past the frame for curve work.

Two speeds is a feature that gets overlooked on saws in this price range. Running 1520 or 2620 FPM means you can slow it down for harder material and speed it up for softwood and quick curve cuts. Blade compatibility matters too, since it takes 72 inch blades from 1/8 up to 1/2 inch. The narrow blades handle tight radius curve work and the wide blades give you the stiffness you want for straight resaw cuts, so one machine covers both jobs with a blade swap.

The cast aluminum table bevels to 45 degrees for angled cuts, and the package includes the parts that usually cost extra. You get a fence, a miter gauge, a work light, a 3 in 1 dust port, a starter blade, and the stand. Buying a benchtop bandsaw and then adding a stand and a fence separately often lands you right back at full price, so a complete package at $229.34 is where the value really shows up.

The 3 in 1 dust port deserves a mention on its own. Bandsaws are notoriously messy because the blade throws dust downward and sideways, and a saw with a real dust port that fits your existing hose keeps the mess manageable instead of leaving a pile under the machine after every session.

Features

• 3.5 amp motor creates cuts up to six inches deep and 9 3/4 inches wide

• Uses 72 inch blades anywhere from 1/8 to 1/2 inches in size

• Spacious 14 1/8 x 12 1/2 inch cast aluminum work table bevels up to 45 degrees

• Operates at two speeds of either 1520 or 2620 FPM

• Includes a 2 year warranty, a work light, a 3 in 1 dust port, a fence, a miter gauge, and a 3/8 inch blade at 6 TPI

• Comes with a stand

Who This Is Best For

This belongs in a garage shop, a basement shop, or any small woodworking space where a full size 14 inch cast iron bandsaw is more machine and more money than the work requires. It is a first bandsaw more than a forever bandsaw, and that is exactly the point at this price.

It is a strong fit for the hobbyist woodworker doing curved parts, small furniture, boxes, and cutting boards. It works well for the crafter cutting scrollwork, signs, and toy parts, and for the woodturner who needs to round bowl blanks before mounting them on the lathe. Six inches of resaw is also enough for anyone wanting to slice their own thin stock for boxes or drawer bottoms.

The person who should look elsewhere is the one resawing wide slabs or running production hardwood every day. That is a 14 inch cast iron machine job with more motor behind it. For the other 90% of small shop bandsaw work, this covers it, and it covers it with a fence, a stand, and a work light included.

At $124.30 below its 90 day average and the lowest price it has ever hit, this is the point where waiting for a better deal stops making sense.

Lock in the $229.34 price on the WEN band saw here

This is a limited time price and it can change without notice.

What would be the first project you would cut on a bandsaw if you added one to your shop? Drop a comment and let everyone know.

Amazon prices change fast, so we monitor them daily. See our Amazon Tool Deals Hub for the latest lightning sales and limited-time discounts. Be sure to check our curated lists for Lowe's, Home Depot, and Rockler as well.