50% Off Taytools Center Finding Ruler Set: Just $8.50

Taytools has the 3 Piece Center Finding Ruler Set cut in half, dropping it from $16.99 to $8.50. You get 6 inch, 12 inch, and 18 inch stainless steel rulers for less than the price of a single decent ruler at most stores. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Taytools Center Finding Ruler Set for $8.50

Final Price Breakdown

• Regular price: $16.99

• Discount: 50% off

• Instant savings: $8.49

• Final price: $8.50

• Deal ends: Limited time only

Why This Tool Is Worth It

Finding center is one of those small tasks that eats more time than it should. Measure the width, divide by two, convert the fraction, measure again from the edge, then hope you did the math right. Do that fifty times over a project and the errors start showing up in your joinery.

A center finding ruler skips all of it. Zero sits at the middle of the ruler with equal graduations running out to both ends, so you line up the ends of your workpiece with matching numbers and mark straight down the middle. No math, no conversion, no second guessing. This matters most on odd widths, where dividing something like 5 and 13/16 in your head is exactly where mistakes creep in.

Center marks show up constantly in real work. Dowel and domino layout, hinge and pull placement, drawer knob centering, mortise layout, dividing a shelf, locating a hole in a bracket. Getting those right on the first try is the difference between a clean build and a filled and sanded fix.

The three size range is what makes this a set worth owning rather than a single tool. The 6 inch lives in a pocket for small parts and hardware layout. The 12 inch covers drawer fronts and rails. The 18 inch handles wider panels and cabinet parts. At $8.50 for all three, this is one of the cheapest accuracy upgrades a shop can make.

Features

• Center point zero positioned at the midpoint with equal measurements extending to both ends for fast, accurate center marking

• Top edge graduated in 1/32nds from the center in both directions

• Bottom edge offers 1/16th graduations reading left to right for standard measurements

• Set includes 6 inch, 12 inch, and 18 inch rulers

• Made from durable brushed stainless steel to withstand regular use

• Graduation marks are precision photo etched and black filled for long term readability

• Markings are on both sides of each ruler for added versatility

• Suited to both woodworking and metalworking tasks

Who This Is Best For

This set belongs in every shop, from a corner of the garage to a full production woodworking space. Hobbyists get the most obvious benefit, since layout mistakes are where beginner projects usually go sideways and this removes a whole category of them.

Cabinet and furniture makers will use these constantly for hardware layout, since centering pulls, knobs, and hinges is a daily task. Anyone doing dowel or domino joinery gets the same benefit on every glue up.

Metalworkers are covered too. The 1/32 graduations and stainless construction hold up fine in a metal shop, and center marks matter just as much when you are laying out hole locations in stock.

The only shop that might pass is one already running a full set of center finding rules and layout tools. Even then, at $8.50 these make sense as a second set to keep at the drill press or miter station so you are not walking back to the bench every time.

Lock In the 50% Savings on the Taytools Ruler Set 📏

Know someone who is still dividing measurements in their head at the bench? Share this post with them while the price is cut in half.

Looking for more savings at Home Depot? Check out our permanent hub for deals at The Home Depot Deals Page for daily updates on Milwaukee, DeWALT, and more. We also track the best tool sales at Lowe's, Amazon, and Rockler.