Save $31 on Rockler Router Table Half Lap Jig Deal
Rockler just dropped the Router Table Half Lap Jig to $93.99, down from $124.99. That is $31 off a purpose built jig that turns your router table into a precision half lap and mitered half lap machine. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support! Prices valid at time of posting but are subject to change at anytime.
Final Price Breakdown
Was: $124.99
Now: $93.99
Savings: $31
Discount: About 25% off
Expiration: Limited time only
Why This Tool Is Worth It
Half lap joints are one of the strongest, cleanest looking joinery options in woodworking, and they show up everywhere from face frames and door grids to garden gates, frame and panel work, and decorative cross laps. The catch is that cutting them accurately on a router table usually means rigging up your own sled or fighting with miter gauge setups that drift on you. This Rockler jig solves that problem in one package.
The reference pins at 90° and 45° make setup repeatable. You drop the workpiece against the pin, lock it in with the toggle clamp and bit saver hold down, and you get a consistent half lap or mitered half lap every time. Steel set screws in the registration pins let you fine tune the angles dead on, so 90 means 90 and 45 means 45.
The little details are what make this jig pay off. Two replaceable zero clearance inserts mean clean tearout free cuts at the bit. The onboard center marking tool helps you set bit height to exactly half the workpiece thickness, which is the single most important measurement on a half lap. The tall grip handles and clear guard keep your hands well away from the spinning bit, and the 15 in. aluminum miter bar with nylon set screws gets you a no slop fit in your router table miter slot.
At $31 off, this is a jig that opens up a whole category of joinery without the trial and error of building your own setup.
🛒 Lock in the $31 off Rockler Half Lap Jig deal before it ends
Features
Lets you use your router table to cut tight fitting half lap and mitered half lap joints
Includes two replaceable zero clearance inserts that mount to the phenolic base for clean cuts and precise positioning
Wooden sacrificial backer included provides support for your workpiece
Reference pins at 90° or 45° make setup easy for regular and mitered half lap joints
Steel set screws in registration pins are fine tuned during setup to make sure angles are exactly 90° and 45°
Onboard center marking tool helps mark center of workpiece thickness, making it easier to set bit height
Tall easy to grip handles provide excellent control
Clear guard helps keep hands away from bit
Hold down toggle clamp and Bit Saver hold down clamp hold stock firmly
15 in. long aluminum miter bar features nylon set screws that can be adjusted for a no slop fit
Who This Is Best For
This jig is built for woodworkers who already have a router table and want to add precision half lap joinery to their skill set without building a custom sled. Furniture makers, cabinet builders, frame and panel woodworkers, and serious hobbyists tackling face frames, door grids, garden gates, lattice work, or any cross lap joinery will get the most out of it.
It belongs in any home shop, small custom furniture shop, or weekend woodworking setup where the router table sees regular use. For anyone who has been fighting with miter gauge half laps or hand cutting them on the table saw, this is the kind of upgrade that turns a frustrating joint into a repeatable one.
Know a woodworker who has been wanting to add half lap joinery to their bag of tricks? Share this post with them before the price moves.
Current RYOBI savings at The Home Depot, sorted by budget, battery platform, and category. Updated regularly.