Save $236 on DEWALT 12 in. Sliding Miter Saw, Now $393

The miter saw is the heart of most shops. It is the first tool you reach for on almost every build, and it is the one place where an inaccurate cut ruins everything downstream. Upgrading to a 12 inch double bevel slider is one of the biggest jumps in capability a shop can make, and right now the price makes that jump a lot easier. The DEWALT 15 Amp corded 12 inch double bevel sliding compound miter saw dropped from $629 to $393 at Home Depot, which is $236 off and about 38% off. Blade wrench and material clamp are included.

This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the DEWALT 12 in. Sliding Miter Saw for $393 at Home Depot

Final Price Breakdown

• Regular price: $629

• Sale price: $393

• You save: $236

• Percent off: about 38%

• Includes: miter saw, blade wrench, and material clamp

• Deal window: Limited time only

Why This Tool Is Worth It

Capacity is the number one reason to move up to a 12 inch slider. This one crosscuts 2 inch by 14 inch dimensional lumber at 90 degrees and 2 inch by 10 inch at 45 degrees, which covers stair stringers, wide trim, deck framing, and glue up panels that a 10 inch chop saw simply cannot reach in one pass. If you have ever flipped a board to finish a cut and ended up with a step in the middle, this is the fix.

Accuracy is the other half. The stainless steel detent plate gives 10 positive stops at the angles you actually use, the cam lock miter handle with detent override lets you dial in an off angle fast, and the machined base fence support keeps everything square while you cut. Dual horizontal steel rails riding on linear ball bearings keep the slide smooth and tight over time, which is what separates a saw that stays accurate for years from one that develops slop by season two.

Double bevel matters more than people expect. Bevel range runs 0 degrees to 48 degrees both left and right, so you flip the head instead of flipping the workpiece. For crown molding, base, and any long trim run, that saves time and removes a common source of mistakes.

The 15 amp motor at 3,800 RPM has the power for hardwood and repetitive framing cuts, and the dust collection captures over 75% of dust generated, which is a real difference in an enclosed shop or garage. Backed by a 3 year limited warranty, 1 year free service, and a 90 day money back guarantee.

Features

• Precise miter system and machined base fence support help deliver consistent cutting accuracy

• 15 amp motor running at 3,800 revolutions per minute provides performance and durability for tough jobs

• Cross cut capacity handles 2 inch by 14 inch dimensional lumber at 90 degrees and 2 inch by 10 inch lumber at 45 degrees

• Tall sliding fences support up to 7 1/2 inch crown nested and up to 6 3/4 inch base vertically

• Cam lock miter handle with detent override provides fast and accurate miter angle adjustments

• Stainless steel miter detent plate includes 10 positive stops for common angle settings

• Bevel range from 0 degrees to 48 degrees left and right supports added cutting versatility

• Dual horizontal steel rails with linear ball bearings and an innovative clamping mechanism enhance accuracy and long term durability

• Oversized high visibility bevel scale with positive stops makes settings easier to see and use

• Efficient dust collection system captures over 75% of dust generated

• Includes a 3 year limited warranty, 1 year free service, and 90 day money back guarantee

• Blade wrench and material clamp included

Who This Is Best For

This belongs in a woodworking shop or garage shop where the miter saw lives on a permanent station. Furniture builders, cabinet makers, and anyone cutting hardwood to length all day will appreciate the accuracy and the wider crosscut capacity. Corded also means no battery management and no power drop off on a long day of repetitive cuts.

Trim carpenters and finish crews are the other obvious fit. Nested crown capacity up to 7 1/2 inch and base up to 6 3/4 inch vertically covers most residential trim, and double bevel makes long runs faster. Deck builders, framers, and remodelers get the framing capacity they need without stepping up to a jobsite saw that costs hundreds more.

Serious DIY homeowners planning a deck, a basement finish, or a full trim project will get more done with this than with a 10 inch chop saw, and at this price the gap in cost is smaller than usual.

If you only cut small stock, work exclusively out of a truck, and need something light to carry up ladders, a compact 10 inch saw is still the easier tool to live with. This one is heavy and wants a permanent home.

Lock In the $393 Price Before This Sells Out

Deal is limited time only while supplies last.

Know somebody who is still fighting a small chop saw on wide boards? Share this post with them before the price goes back to $629

Looking for more savings at Home Depot? Check out our permanent hub for deals at The Home Depot Deals Page for daily updates on Milwaukee, DeWALT, and more. We also track the best tool sales at Lowe's, Amazon, and Rockler.