Rockler Saw Blade Cleaning Kit Deal: $27.99, Save 30%

The Rockler Saw Blade Cleaning Kit drops to $27.99 from the regular $39.99, a savings of 30%. It handles blades from 6 1/4 in up to 12 in, which covers your table saw, miter saw, track saw, and circular saws in one kit. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Rockler Saw Blade Cleaning Kit for $27.99

Final Price Breakdown

• Regular price: $39.99

• Deal price: $27.99

• Instant savings: $12

• Percent off: 30%

• Deal expires: limited time only

Why This Tool Is Worth It

Most woodworkers throw money at new blades when what they actually have is a dirty blade. Pitch and resin build up on the carbide and the blade body, and once that happens the blade drags, burns your cuts, runs hotter, and feels dull even though the teeth are fine. A cleaning session often brings a blade back to near new performance for a few dollars of solution instead of $70 for a replacement or $20 for a sharpening.

The reason a dedicated kit is worth having is that cleaning blades in a random pan is a mess. The large clear dish here has raised ribs that suspend and balance the blade in the solution so both sides soak evenly, a molded fill line so you are not guessing how much cleaner to pour, and non slip feet so the whole thing does not slide off the bench. Two plastic blade grips thread through the arbor hole with stainless steel hardware and rubber gaskets, which means you can pick up and flip a blade without putting your fingers near the teeth.

The rest of the kit is built around actually doing the job well. The included cleaning tool has a synthetic scrubbing pad for the blade body and a brass bristle brush for getting into the gullets and around the teeth, and brass is soft enough that it will not damage carbide. The top grip and cleaning tool stow in compartments under the dish, so it stores as one piece instead of scattering across the shop. A lid covers the dish for longer soaks, though it is not a watertight seal. Use it with CMT Formula 2050 or another non toxic liquid blade cleaner, and skip the oven cleaner and solvent based products, which are not recommended here.

Features

• Cleans table saw, miter saw, track saw and other circular saw blades from 6 1/4 in to 12 in in diameter

• Large clear dish has raised ribs for suspending and balancing the blade in cleaning solution

• Line molded into dish shows optimal fill level

• Non slip feet prevent the dish from shifting during use

• Two plastic blade grips with stainless steel threaded hardware and rubber gaskets fasten through the arbor hole for secure blade handling

• Cleaning tool has a synthetic scrubbing pad and brass bristle brush for cleaning field areas and teeth

• Top blade grip and cleaning tool stow in compartments on the underside of the dish

• Lid covers the dish for longer soaking sessions and does not form a watertight seal

• Compatible with CMT Formula 2050 Blade and Router Bit Cleaner (#GRP41616, sold separately) and other non toxic liquid saw blade cleaners

• Note: not recommended for use with oven cleaners or other solvent based cleaners

Who This Is Best For

This belongs in any woodworking shop with a table saw and a miter saw, which is most of them. If you cut a lot of plywood, pine, cedar, or anything with pitch in it, your blades are getting gummed up faster than you think. A hobby woodworker who owns three or four good blades will get the cost of this kit back the first time it saves a blade from the trash or a trip to the sharpener.

It is equally at home in a small production shop or a trim carpentry setup where blades run hard. If you are cutting treated lumber, MDF, or resinous softwoods every week, regular cleaning keeps cuts clean and reduces burning, and it extends the interval between sharpenings. Shops that maintain their own tooling rather than replacing it will find this pays for itself quickly.

Where it does not fit is blades outside the 6 1/4 in to 12 in range, so large sliding panel saw blades or small trim saw blades are not covered. It also is not a sharpener, so a blade with chipped or worn carbide still needs to go out for service. For everything caused by buildup, this handles it.

Get the Rockler Saw Blade Cleaning Kit at $27.99 While the Deal Lasts

When was the last time you actually cleaned your table saw blade? Drop a comment and let us know.

Rockler is the go-to for specialty woodworking gear and jigs. Check our Rockler Woodworking Hub for monthly specials and machine flash sales. For big-box tool discounts, visit our expert-curated guides for Lowe's, Home Depot, and Amazon.