Rockler Deluxe Panel Clamp Deal: Save $37, Now $87.99

The Rockler Deluxe Panel Clamp is down to $87.99 at Rockler, $37 off the regular $124.99 price. This deal is for a single clamp.

Regular clamps can bow a panel under pressure. This one presses in four directions, pulling the joints together and holding the boards flat at the same time.

This post contains affiliate links, which means I may earn a small commission if you buy through them, at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at any time.

Check the Price at Rockler

Final Price Breakdown

  • Regular price: $124.99

  • Sale price: $87.99

  • You save: $37.00 (30%)

  • Expires: November 25, 2026, or while supplies last price subject to change at any time.

Why This Tool Is Worth It

Every woodworker has cranked down on a panel glue up and watched it cup. Then you’re stuck with hours of planing or sanding to get it flat again.

The Deluxe Panel Clamp puts equal pressure on all sides, so the panel can’t bow upward. You get tight joints and a flat surface right out of the clamps.

Setup is quick too. Slide the tailstock along the sawtooth rails, use the printed width marks, and you’re ready to tighten.

Rockler Deluxe Panel Clamp Features

  • Four way pressure squeezes glue joints together and holds boards flat while the glue cures

  • Equal pressure on all sides keeps the panel from bowing upward

  • Great for building tabletops and thick benchtops

  • Sawtooth rails make it easy to position the tailstock to fit your project

  • Panel width marks printed on the rails for faster setup

  • Clamp feet provide clearance for easier adjustment and reposition easily

  • 1.8mm thick steel rails with a durable powder coat finish

  • Powder coated headstock and tailstock assemblies

  • Zinc coated Acme threaded rod and handle

  • Works on panels from 3/4" to 3" thick and 10" to 36" wide

Who This Is Best For

This clamp is built for furniture makers and anyone gluing up tabletops, benchtops, cutting boards, or wide panels.

It’s a fit for any shop that does regular panel glue ups, from a one car garage to a full workshop. If flattening panels after glue up eats up your time, it’s worth a look. 👍

Quick Questions

What size panels does the Rockler Deluxe Panel Clamp handle?
It works on panels from 3/4" to 3" thick and 10" to 36" wide.

Does the panel clamp keep glue ups flat?
Yes. Equal pressure on all sides keeps the panel from bowing upward while the glue cures.

Is this deal for one clamp or a pair?
This deal is for a single clamp.

Check the Price at Rockler

Is a panel clamp on your shop wish list this year?

Previous
Previous

54% Off BOSCH GCM18V-12SDN 12 Inch Miter Saw, Now $329

Next
Next

Rockler 10-18 Mini Lathe Deal: Save $100, Now $299.99