Rockler Bench Cookie Plus 4 Pack Deal: Save 22%

Rockler has the Bench Cookie Plus Work Grippers 4 Pack down to $13.99, a 22% savings off the regular $17.99. For under $14, this is one of the cheapest ways to make an ordinary workbench safer and more useful. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Bench Cookie Plus 4 Pack for $13.99 at Rockler

Final Price Breakdown

• Regular price: $17.99

• Discount: 22% off

• Instant savings: $4.00

• Final price: $13.99

• Deal ends: Limited time only

Why This Tool Is Worth It

Holding a workpiece still is half of woodworking. Clamps get in the way, mats slide around, and chasing a panel across the bench while you sand it is a fast track to a bad edge or a bruised knuckle. Bench Cookies solve that problem with almost no setup. Drop four on the bench, set the workpiece on top, and it stays put.

The bigger win is clearance. Because they lift the piece off the bench surface, you can sand, rout, or plane right up to the edges without your tool crashing into the benchtop. Routing a full perimeter profile becomes a single pass instead of a stop and reposition exercise. Finish work gets easier for the same reason, since less surface contact means fewer marks on a fresh coat.

They also protect what you have already built. The gripper surface will not mar a finished panel, which matters when you are flipping a cabinet door for the second coat or working on a tabletop you have already spent hours leveling.

The last reason this is worth the money is how far the system goes. Risers, T track risers, finishing cones, sawhorse clips, and finishing bridges all thread into or fit over the same base pucks. Buy the four pack now and you can build the setup out over time as your projects demand it.

Features

• Bench Cookie Risers: The perfect accessory to add versatility to your Bench Cookie Plus Work Grippers. Standard Risers (#35142, sold separately) double the height and XL Risers (#34671, sold separately) allow you to double or triple the height of your Bench Cookie Plus Work Grippers or Bench Cookie Connect. Just thread the riser into the center insert.

• Bench Cookie T Track Risers: T tracks are renowned for their adjustability, and Bench Cookies for their versatility, and now this simple kit (#46311, sold separately) allows you to combine the two for the ultimate in both. T Track Risers slide conveniently into your T track to provide a set of four elevated posts for your Bench Cookie Plus Work Grippers.

• Bench Cookie Finishing Cones: Bench Cookie Finishing Cones (#40607, sold separately) lift your project off your bench with minimal surface contact, keeping it stable during the entire finishing process. Custom sized to fit snugly over the Bench Cookies. Team a set of Bench Cookie Finishing Cones with a set of Bench Cookie Plus Work Grippers for a fail safe project finishing system.

• Bench Cookie Sawhorse Clips: Sawhorses are practical when you need a portable work surface, but workpieces tend to rattle around and get scratched while you saw, rout and sand. Simply slip the clips (#43624, sold separately) over your sawhorses, spin your Bench Cookies Plus on, and you have a no mar, no slip work surface that is easily resizable for any workpiece.

• Bench Cookie Finishing Bridges: Bench Cookie Finishing Bridges (#46554, sold separately) allow you to balance narrow rails, stiles, dowels and louver stock for finishing. They provide minimal surface contact between the Bench Cookie Finishing Bridge and your workpiece. Meanwhile, the Work Grippers maintain a non slip, stable base for the Bridges.

Who This Is Best For

This one fits just about every shop, which is rare for an accessory. Hobby woodworkers working out of a garage or basement get the most immediate benefit, since a single small bench has to do sanding, routing, assembly, and finishing all in the same spot. Bench Cookies make that bench flexible without adding a single square foot of footprint.

Cabinet and furniture makers will lean on them during finishing runs, where flipping doors and panels without leaving marks is the whole game. Anyone doing edge profiling with a router will appreciate the clearance more than anything else.

They also travel well. If you work off sawhorses or a portable table on job sites, the sawhorse clips turn a rattling setup into a stable one.

The only shop that might pass is one already running a full bench dog and holdfast system for everything. Even then, at under $14 these cover the finishing and sanding jobs that dogs handle poorly.

Lock In the 22% Savings on Bench Cookie Plus at Rockler 🍪

Know someone whose workpieces are always sliding around the bench? Share this post with them while the price is still down.

Rockler is the go-to for specialty woodworking gear and jigs. Check our Rockler Woodworking Hub for monthly specials and machine flash sales. For big-box tool discounts, visit our expert-curated guides for Lowe's, Home Depot, and Amazon.