62% Off Porter Cable 23 Gauge Pin Nailer 2 Pack, $94.45

The Porter Cable 23 Gauge 1-3/8 in. Pneumatic Pin Nailer 2 Pack just dropped to $94.45, down from $250.84. That is a 62% discount and over $156 in savings. Two pin nailers at that price works out to about $47 each, which is well under what a single 23 gauge pinner usually costs. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Porter Cable Pin Nailer 2 Pack for $94.45

Final Price Breakdown

• Regular price: $250.84

• Deal price: $94.45

• You save: about $156.39

• Total discount: 62% off

• Cost per nailer: about $47 each

• Deal expires: August 9, 2026

Why This Tool Is Worth It

A 23 gauge pin nailer does something no other fastener tool can. The pins are so thin they leave a hole you often cannot find without looking hard, and they have no head to fill. That means you can tack a piece of trim or molding in place and skip the wood filler step entirely. For anyone who has spent an evening filling and sanding brad nail holes, that alone is the argument.

The bigger benefit is what pin nailers do not do. Thin material splits when you drive an 18 gauge brad into it, and delicate mitered corners crack under the pressure. These are built specifically for materials that could split using larger tools, so face frames, small moldings, and thin edge banding go together without damage.

There is also the practical side of ownership. This design minimizes internal friction to extend service life and is virtually maintenance free, requiring no oil to be added. That matters because oil in a pneumatic tool can end up on your workpiece and ruin a finish. Using 5/8 in. to 1-3/8 in. pins covers most trim work you will run into. Getting two of them means one can stay loaded with short pins and one with long, or you can keep a spare in a second work area. ⚡

Features

• Designed to minimize internal friction and extend service life

• Virtually maintenance free, requires no oil to be added

• Ideal for materials that could split using larger tools

• Uses 5/8 in. to 1-3/8 in. 23 gauge fasteners

• 23 gauge pins leave a nearly invisible hole with no head to fill

• Pneumatic operation, so an air compressor and hose are required

• Sold as a 2 pack of PIN138B pin nailers

Who This Is Best For

This is a trim carpenter's tool first. Anyone installing crown, base, casing, shoe molding, or small decorative trim will reach for a pinner constantly, especially on prefinished material where filling a hole is not an option. Cabinet installers use them for scribe moldings and light rail where a brad would blow through or split the piece.

In the shop, it belongs on the assembly bench. Woodworkers use pin nailers to hold glue ups in position while clamps go on, tack face frames square, attach thin edge banding, and hold small parts for jigs. That temporary holding role is where a pinner quietly becomes one of the most used tools in the shop. Small custom shops and serious hobbyists building furniture and cabinets get the most out of this. Since these are pneumatic, you need a compressor and hose already in the shop for this deal to make sense. If you have that setup, two pinners at $47 each is a strong add, and the second one makes a solid gift or backup.

Lock In the Pin Nailer 2 Pack Before August 9

Know a woodworker who is still filling brad nail holes on every trim job? Share this post with them before the deal ends.

Deal expires: August 9, 2026

Looking for more savings at Home Depot? Check out our permanent hub for deals at The Home Depot Deals Page for daily updates on Milwaukee, DeWALT, and more. We also track the best tool sales at Lowe's, Amazon, and Rockler.