Narex Richter 5 Piece Chisel Set Deal: Save $60

The 5 Piece Narex Richter Bevel Edge Chisel Set just dropped to $179.99, down from $239.99. That is $60 off a premium set of hand tools that rarely goes on sale. You get 1/4", 3/8", 1/2", 3/4" and 1" chisels, which covers nearly every joinery task in a woodworking shop. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Narex Richter 5 Piece Chisel Set for $179.99

Final Price Breakdown

• Regular price: $239.99

• Deal price: $179.99

• You save: $60

• Cost per chisel: about $36 each

• Deal window: limited time only

Why This Tool Is Worth It

Chisels are one of the few tools where the price difference shows up immediately in the work. A budget chisel loses its edge in a few cuts and takes forever to flatten out of the box. The Richter line sits at the opposite end. Blades are drop forged from Chrome Vanadium steel, then hardened, cryogenically treated, and tempered to a minimum of 62 HRC. That hardness is the number that determines how long an edge lasts between sharpenings.

The prep work is what separates these from ordinary chisels. Backs come ground flat to precise tolerances, so initial flattening takes minutes instead of an evening at the stones. Fine grinding and polishing leave a mirror surface, which means less friction in the cut and cleaner results in end grain.

The ultra thin side bevels matter most for dovetails. They let the chisel reach into a tight corner and clean the socket without bruising the surrounding walls. Add polished European ash handles, solid stainless steel ferrules, and a leather washer, and you have a set built for chopping rather than paring alone. At $179.99 for five sizes, this lands well below what comparable premium chisels usually cost individually.

Features

• Includes 1/4", 3/8", 1/2", 3/4" and 1" chisels

• Ultra thin sides provide access to dovetail corners without bruising

• Blades made from the highest quality Chrome Vanadium (Cr V) steel using traditional drop forging methods

• Hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRC

• Backs are ground flat to precise tolerances, requiring minimal flattening during initial sharpening

• Subsequent fine grinding and polishing ensure a mirror like surface

• Front bevel is ground at 24°, with a secondary micro bevel advisable depending on how the chisel is used

• Polished handles from selected European ash hardwood

• Solid stainless steel ferrules and leather washer

Who This Is Best For

This set is aimed at woodworkers who cut joinery by hand. Anyone chopping dovetails, paring tenon cheeks, fitting mortises, or cleaning up router waste will feel the difference from the first cut. Furniture makers, cabinetmakers, and hand tool woodworkers get the most out of blades that hold an edge at 62 HRC.

It belongs in a shop where the bench does real work. If you already own a decent sharpening setup and you find yourself frustrated by chisels that dull halfway through a joint, this is the upgrade that fixes it. Serious hobbyists building furniture in a garage shop and small custom shops selling their work both fit the profile. Beginners who plan to learn hand cut joinery properly are also well served here, because starting with flat backs and quality steel removes the biggest obstacle new woodworkers hit. This is not the set for someone who only needs a chisel to pop open paint cans or scrape glue.

Lock In the Narex Richter Chisel Set at $60 Off

Which size chisel do you reach for most in your shop? Drop a comment below and let everyone know.

Deal expires: limited time only

Rockler is the go-to for specialty woodworking gear and jigs. Check our Rockler Woodworking Hub for monthly specials and machine flash sales. For big-box tool discounts, visit our expert-curated guides for Lowe's, Home Depot, and Amazon.