Save 25% on Narex Bevel Edge Chisel Set, Now $48.74
Sharp, thin, and built to take a beating. The Narex Premium Bevel Edge Chisel Set just dropped to $48.74 at Rockler, down from $64.99. That is 25% off a four chisel set that covers the sizes most woodworkers reach for every single day. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!
⚠️ Prices valid at time of posting but are subject to change at anytime.
Final Price Breakdown
Regular price: $64.99
Discount: 25% off
You save: $16.25
Final price: $48.74
Deal ends: Limited time only
Why This Tool Is Worth It
Chisels are one of those tools where quality shows up immediately. A cheap chisel rolls its edge, wanders off your layout line, and turns a clean dovetail into a gappy mess. A good one stays sharp, tracks straight, and lets you pare to the line without fighting the tool.
What makes this set stand out is the side geometry. The bevels are ground down to roughly 1mm, which is dramatically thinner than a standard bench chisel. That thin profile is the difference between reaching into the corner of a dovetail socket and hammering away at it from an awkward angle. If you cut joinery by hand, thin sides are not a luxury feature, they are the whole point.
The hornbeam handles matter too. Hornbeam is one of the densest hardwoods available and it soaks up mallet strikes without splitting or mushrooming over time. Pair that with blades hardened to 59 HRC and you have a set that holds an edge through real work instead of needing a trip to the stones every twenty minutes.
At $48.74 for four chisels, you are paying about $12 per chisel for a tool that can genuinely last decades with basic care.
Features
Includes four chisels: 6mm, 12mm, 20mm, and 26mm (0.24", 0.47", 0.79", and 1.02")
Sides ground significantly thinner than standard chisels, roughly 1mm, for unobstructed access into dovetail corners
Handles made from hard, hefty hornbeam, strong enough to withstand heavy mallet blows
Blades forged from Czech made chromium manganese steel
Heat treated and tempered to 59 HRC for solid edge retention
Who This Is Best For
This set belongs in the shop of anyone doing hand cut joinery. Dovetails, mortises, tenons, hinge mortises, and cleanup work all get easier with chisels that are properly ground and properly hardened. The four size range is the practical sweet spot, small enough for delicate paring and wide enough for cleaning out a housing.
It is a strong fit for the hobbyist woodworker upgrading from a big box store starter set, the furniture maker who wants a reliable bench set without spending several hundred dollars, and the woodworking student building a first serious kit. Cabinet shops and small production shops will get plenty of use out of these too, especially for the hinge and hardware fitting work that never fully goes away.
If your bench currently holds a set of chisels you have to sharpen constantly, or that will not fit into a dovetail corner, this is the upgrade that pays for itself in frustration saved. 🔨
👉 Claim the 25% Off Narex Chisel Set Before It Is Gone
Know someone who has been meaning to upgrade their chisels? Share this post with them before the price goes back up.
Rockler is the go-to for specialty woodworking gear and jigs. Check our Rockler Woodworking Hub for monthly specials and machine flash sales. For big-box tool discounts, visit our expert-curated guides for Lowe's, Home Depot, and Amazon.
Bosch 18V Compact Reciprocating Saw