Milwaukee Pipeline 2026: Best New Tools
Milwaukee Pipeline 2026 is the one event where you find out what the next year of red tools looks like. This year brought a bigger FORGE battery, four new PACKOUT pieces, a rolling fridge and a lunch warmer that runs on M18. Below is every new Milwaukee tool announced, what it actually does, and which ones you can buy right now.
Some Pipeline tools are still coming soon. Shop the ones that are available now.
Affiliate link. We may earn a commission at no extra cost to you.A few of these are genuine platform movers. The M18 REDLITHIUM FORGE HD15 battery changes what the heavy M18 tools can do, the M18 FUEL 4 Gallon Wet/Dry Vacuum finally makes cordless cleanup stack properly, and the PACKOUT Hand Truck fixes the one gap in that storage system. Others are comfort items that sell out anyway, like the M18 30QT Rolling Fridge.
What is new at Milwaukee Pipeline 2026
- Batteries, chargers and portable power
- New PACKOUT storage and cleaning accessories
- Cordless cleanup with the M18 FUEL wet/dry vacuum
- Jobsite comfort: fridge, lunch warmer and fan
- Cutting and demolition tools
- Automotive and mechanic tools
- Hand tools and rechargeable lights
- Outdoor power equipment
New Milwaukee M18 Batteries and Charging Announced at Pipeline 2026
1. Milwaukee M18 REDLITHIUM FORGE HD15 Battery Pack for High Draw Tools (48-11-1819)
This is the headline of the whole show. Milwaukee rates the HD15 at 50 percent more power than the HIGH OUTPUT HD12.0, which is what feeds the big cordless tools on this list.
The number that matters more to most people is run time. Milwaukee claims 25 percent more run time than the FORGE HD12.0 in the same physical size, so you are not carrying a larger pack to get it. It also supports the COOL-CYCLE active cooling system on compatible chargers, which cuts the wait between charges.
If you run a cut off saw, a rear handle circular saw or an SDS MAX hammer on M18, this is the pack to build around. If your kit is a drill and an impact driver, you will not feel the difference and your money goes further elsewhere.
See the M18 REDLITHIUM FORGE HD15 Battery at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
2. Milwaukee Four Bay Simultaneous Super Charger for M18 and M12 Batteries (48-59-1818)
Most four bay chargers cycle through packs one at a time. This one charges all four at once, which is the difference between a crew waiting and a crew working.
Milwaukee says four FORGE HD12.0 packs reach 100 percent in 90 minutes, and calls it up to 10 times faster charging for four batteries. It handles both M18 and M12 REDLITHIUM packs, so one charger covers the whole truck.
The PACKOUT compatibility is the part shop guys will use. Mount it on a stack, plug in once, and your charging station moves with the rest of your storage.
See the Four Bay Simultaneous Super Charger at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
3. Milwaukee M18 TOP-OFF 350W Power Supply and Charger with PACKOUT Compatibility (2856-20)
The TOP-OFF turns an M18 battery into a small power station for everything that is not a tool. You get two 120V AC outlets, a 100W USB-C PD port and a 15W USB-C port.
That means a laptop, a fan, a phone and a headlamp can all run at the same time off packs you already own. The pure sine wave inverter matters here, because cheap inverters are rough on laptops and camera gear.
It runs on one M18 battery and takes a second one to double run time. For anyone filming, working out of a truck or running a job trailer, this is the most useful item on the list.
See the M18 TOP-OFF 350W Power Supply at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
4. Milwaukee ROLL-ON 6.0kWh Battery Power Supply as a Gas Generator Replacement (3301R)
ROLL-ON is Milwaukee going straight at gas generators and temporary power. It carries a 6kWh integrated REDLITHIUM battery and puts out 7200W surge with 3600W continuous.
Milwaukee claims up to 2.4 times more run time than the previous version, which is the whole argument for battery power on long jobs. You get two 20A GFCI duplex outlets with breakers plus a USB-C and a USB-A port.
No fuel, no fumes and no pull cord means it works indoors and in finished spaces. That is where a gas unit simply is not an option.
See the ROLL-ON 6.0kWh Power Supply at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee PACKOUT Storage Released at Pipeline 2026
5. Milwaukee PACKOUT Single Drawer Tool Box for Organized Small Parts (48-22-8441)
Drawers beat lids when you are stacked three boxes high. This single drawer box opens with one hand, so you are not setting down a tool to get into it.
It holds up to 50 pounds and includes dividers that segment the drawer and accept tool box attachment points. The locking security bar lets you padlock the drawer shut for transport.
For most people this is the box that lives in the middle of the stack and holds fasteners, bits and blades. It is the piece the single drawer crowd has been asking Milwaukee for.
See the PACKOUT Single Drawer Tool Box at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
6. Milwaukee PACKOUT Rolling Tool Chest with Compact Split Lid for Faster Access (48-22-8416)
The split lid is the update that fixes a real annoyance. You can get into one half of the chest without unstacking whatever is riding on top.
It carries a 250 pound capacity and uses the same versatile dividers as the rest of the new PACKOUT pieces. As the rolling base of a stack, it does the hauling for everything above it.
If you are starting a PACKOUT setup from scratch, this is a smarter base than the original rolling chest. Quick access matters more than you think once the stack is loaded.
See the PACKOUT Rolling Tool Chest at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
7. Milwaukee PACKOUT Hand Truck for Moving a Full Tool Stack (48-22-8419)
This is the piece that fills the last gap in the system. A rolling base works on smooth floors, but a hand truck handles curbs, gravel and stairs.
It carries up to 400 pounds on 10 inch flat free wheels, so there is no tire to go soft in the truck bed. Every PACKOUT box you already own locks straight onto it.
The folding design is what makes it practical, because a hand truck that will not store gets left at the shop. If you haul a full stack to jobs, this earns its spot fast.
See the PACKOUT Hand Truck at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
8. Milwaukee PACKOUT Compact Crate for Grab and Go Loads (48-22-8437)
The wide front opening is the whole point of this one. You can reach in and pull what you need while it is still stacked under other boxes.
A metal reinforced top handle means you can grab it loaded and walk. The two included dividers have cuttable score lines, so you can shape the inside around what you actually carry.
Capacity is 30 pounds, which puts it in the fasteners, cords and consumables role rather than heavy tools. It is backed by a limited lifetime warranty like the rest of the PACKOUT line.
See the PACKOUT Compact Crate at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
9. Milwaukee PACKOUT Cleaning Accessory Kit for Shop Vacuum Cleanup (49-90-1970)
Buying vacuum attachments one at a time gets expensive and you always end up missing the one you need. This kit bundles the common ones in a single purchase.
You get a round brush tool, a floor utility nozzle, a floor brush tool, a crevice tool and two extension wands, all in a 1-7/8 inch diameter. That size is the standard most aftermarket accessories use.
If you own the M18 FUEL 9 Gallon Dust Extractor, swap the stock hose end for the included adapter to get 1-7/8 inch compatibility. That one adapter opens up a lot of attachment options.
See the PACKOUT Cleaning Accessory Kit at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Cordless Vacuum for Jobsite and Shop Cleanup
10. Milwaukee M18 FUEL 4 Gallon Wet/Dry Vacuum with PACKOUT and VACLINK (0971-20)
Cordless vacuums usually give up suction to stay portable. This one is rated at 70 CFM and 60 inches of sealed suction, which is real working performance for a 4 gallon tank.
The POWERSTATE brushless motor and REDLINK PLUS electronics do the work, and VACLINK lets it start with the tool instead of manually. It is optimized for on stack use, so it runs while mounted to your PACKOUT setup.
Milwaukee also reworked tank removal, which is the part everyone complains about when emptying wet debris. For a woodworking shop this is a good middle ground between a shop vac and a full dust extractor.
See the M18 FUEL 4 Gallon Wet/Dry Vacuum at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Jobsite Comfort Tools for Break Time
11. Milwaukee M18 Jobsite Lunch Warmer for Hot Meals on Site (0811-20)
This is the one people will argue about in the comments, and it will still sell out. You preset the mealtime and it warms your food automatically so it is ready when you break.
Two stainless steel containers hold up to 4.75 cups each with leakproof lids for transport. One M18 REDLITHIUM XC5.0 battery heats up to two meals, and adjustable heat settings let you dial in the temperature.
It has an impact resistant design with an IP54 rating for water and dust, plus PACKOUT compatibility. If you eat out of a cooler five days a week, that is a real quality of life upgrade.
See the M18 Jobsite Lunch Warmer at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
12. Milwaukee M18 30QT Rolling Fridge with No Ice Required (0810-20)
A cooler wastes half its space on ice and still leaves your lunch swimming by noon. This one cools to minus 4 degrees Fahrenheit with no ice at all.
That means all 30 quarts stay usable storage and the temperature holds steady all day. It rolls on all terrain wheels and runs off M18 batteries you already have.
PACKOUT compatibility means it fits into the same stack as the rest of your gear. For a shop, it doubles as the drink fridge you can wheel out to the driveway on a Saturday.
See the M18 30QT Rolling Fridge at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
13. Milwaukee M12 Brushless Mounting Fan for Tight Work Spaces (0825-20)
Air movement changes how long you can stay in an attic or a crawl space. This M12 fan pushes up to 400 CFM at speeds up to 17 miles per hour.
The multi pivot head lets you aim the air where you are actually working instead of at the ceiling. You can mount it three ways with a clamp, a magnet or a passthrough.
Running on M12 keeps it small enough to stash in a bag rather than a truck bed. It is a simple tool that gets used far more than people expect.
See the M12 Brushless Mounting Fan at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Cutting and Demolition Tools from Pipeline 2026
14. Milwaukee M18 FUEL 10-1/4 inch Rear Handle Circular Saw for Framing and Timbers (3026-21HD)
A 10-1/4 inch blade gets you 3-13/16 inches of cut depth at 90 degrees. That is a 4x in one pass, which is the reason this saw exists.
Milwaukee positions it as the most powerful saw in its class for carpenters, remodelers and general contractors. Rear handle geometry gives you better control on long rips than a sidewinder does.
Pair it with the FORGE HD15 pack if you plan to cut hard all day. This is a saw built for beams and posts, not for breaking down sheet goods.
See the M18 FUEL Rear Handle Circular Saw at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
15. Milwaukee M18 FUEL 9 inch Cut-Off Saw for Concrete and Metal Cutting (2919-22HD)
Cutting concrete without a gas saw or a cord is a real change for small jobs. Milwaukee rates it at up to 10 feet in concrete or 90 cuts in number 5 rebar per charge with one FORGE HD15 pack.
The safety features are the part worth paying for. AUTOSTOP kickback protection and a RAPIDSTOP blade brake that stops in under two seconds are not optional features on a 9 inch wheel.
An electronic water valve controls water flow to keep the mess and the dust down. The kit includes a diamond masonry blade, a metal cut off wheel, a wrench and a quick connect fitting.
See the M18 FUEL 9 inch Cut-Off Saw at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
16. Milwaukee M18 FUEL 18 lb SDS MAX Demolition Hammer for Floors and Walls (3018-22HD)
Milwaukee says this one hits harder than an 18 pound corded hammer, which is the claim that matters. It delivers 11.4 foot pounds of impact energy through a POWERSTATE brushless motor.
REDLINK PLUS intelligence manages the load so you are not cooking the tool on long chipping runs. It is built for floors, walls and columns rather than light tile work.
ONE-KEY tracking is included, which matters if tools leave your sight on a crew. Going cordless on a demo hammer removes the extension cord you always trip over.
See the M18 FUEL SDS MAX Demolition Hammer at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
17. Milwaukee MX FUEL 27 lb SDS MAX Demolition Hammer for Heavy Concrete Work (MXF365-0)
When 18 pounds is not enough, this is the next step up. The MX FUEL platform delivers 26.1 joules of impact energy from the POWERSTATE brushless motor.
That is corded level output for removing concrete, block and tile on both walls and floors. It also drives ground rods, which is a common ask for electrical crews.
Keep in mind that MX FUEL is its own battery platform separate from M18. If you are not already on MX FUEL, factor the battery and charger into the cost.
See the MX FUEL 27 lb SDS MAX Demolition Hammer at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
18. Milwaukee M12 FUEL 16 Gauge Scroll Shear for Sheet Metal Cuts (2487-20)
Scroll shears cut clean and leave no swarf, which beats a grinder for finish work. This one matches corded cutting capacity in a compact M12 body.
It handles 16 gauge mild steel, 18 gauge stainless and 26 gauge spiral seams, with half inch radius cuts for tight curves. A five mode variable speed dial plus an Auto-Load mode lets you adjust speed as you cut.
The small form factor is what makes it usable in ductwork and tight framing. HVAC and metal roofing guys will get the most out of this one.
See the M12 FUEL 16 Gauge Scroll Shear at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Automotive and Mechanic Tools Announced at Pipeline 2026
19. Milwaukee M18 FUEL 3/4 inch High Torque Impact Wrench for Heavy Fasteners (2964-22)
Up to 2,000 foot pounds of nut busting torque is the number to focus on. That is enough to retire the air hose for most shop work.
Cutting the compressor out of the equation means no lines to drag and no waiting on tank pressure. ONE-KEY lets you set torque control modes and track the tool.
For suspension work, heavy equipment and stubborn rusted hardware, this is the size that gets it done. The 3/4 inch drive matters as much as the torque number.
See the M18 FUEL 3/4 inch High Torque Impact Wrench at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
20. Milwaukee M18 FUEL 3/4 inch Extended Anvil Impact Wrench for Tire Service (2969-22 and 2969-20)
Same 2,000 foot pounds of nut busting torque, with a 6 inch extended anvil. That extra reach is what gets you to lug nuts behind a deep wheel.
Milwaukee built this one specifically for commercial tire service, where access is the daily problem. If you have ever fought a socket extension on a truck wheel, you know the difference.
It comes as a kit (2969-22) or bare tool (2969-20), so buy the bare version if you already have FORGE packs. Everything else matches the standard anvil model.
See the M18 FUEL Extended Anvil Impact Wrench at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
21. Milwaukee M12 FUEL 1/4 inch Die Grinders for Service Technicians (3486-22 and 3487-20)
Die grinders live in tight spots, so size matters as much as power. Both versions run a POWERSTATE brushless motor with improved torque and more sustained power.
The straight die grinder kit (3486-22) generates 0.5 horsepower of motor output for general grinding, deburring and porting. The extended version (3487-20) trades compactness for reach into deeper work.
Running on M12 keeps the weight down through long sessions, which is where cordless usually falls apart. Pick the extended model if you work inside engine bays and frames.
See the M12 FUEL Die Grinders at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
22. Milwaukee M12 FUEL 1/4 inch Extended Reach Ratchet for Deep Applications (3058-21)
Busted knuckles usually come from a ratchet that is too fat for the space. This one adds length while keeping the most compact head and body size in the lineup.
The 1/4 inch head profile stays slim without giving up durability, which is the hard part of that design. Longer reach means fewer extensions stacked up and less flex.
If you already run M12 ratchets, this fills the gap between the standard and the long throw versions. Mechanics and service techs are the target here.
See the M12 FUEL Extended Reach Ratchet at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
23. Milwaukee M18 FUEL Grease Gun for Fast Equipment Maintenance (3646-21)
Greasing equipment is one of those jobs where flow rate is the whole story. This one runs an industry leading max flow rate of up to 16 ounces per minute.
An auto prime valve cuts down on the manual priming that wastes time on every cartridge change. The back pressure lever makes stuck couplers easier to pull off a zerk.
Those two features are exactly the complaints people have with older cordless grease guns. If you maintain tractors, skid steers or trailers, this saves real time.
See the M18 FUEL Grease Gun Kit at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Hand Tools and Adjustable Wrenches
24. Milwaukee 12 inch Quick Adjust Smooth Jaw Wrench for Finished Surfaces (48-22-7200)
Spinning an adjustment wheel across a wide range is slow. This wrench lets you press a lever and slide the jaws to size, up to 2-5/8 inches of capacity.
A micro adjust wheel then dials in a tight grip on the fastener so nothing slips. The smooth jaws protect chrome, plumbing fixtures and anything with a finish you care about.
The slim profile also gets into places a standard adjustable wrench will not fit. It is backed by a limited lifetime warranty.
See the 12 inch Quick Adjust Smooth Jaw Wrench at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
25. Milwaukee 3PC Ratcheting Adjustable Wrench Set for Faster Fastening (48-22-7422)
The ratcheting head is the reason to look at this set. You are not pulling the wrench off and resetting it every quarter turn in a tight corner.
Quick set jaws push open and fit fasteners from 3/8 inch to 1-1/4 inch, so there is no adjustment wheel to fiddle with. Fastener corner grip helps in spots where you cannot get a full swing.
You get 6 inch, 8 inch and 10 inch wrenches with smooth jaws that will not mar a finish. The set is covered by a limited lifetime warranty.
See the 3PC Ratcheting Adjustable Wrench Set at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Rechargeable Lights for Inspections and Task Work
26. Milwaukee Rechargeable Flat Flashlight with Green Laser Pointer (2016R)
The flat, pocketable shape is what makes this one get carried instead of left in the truck. It puts out 1,300 lumens of TRUEVIEW high definition output.
The integrated green laser pointer is the part that separates it from every other pocket light. Pointing at a specific joist or run beats describing it across a room.
For inspections, walkthroughs and job walks with a customer, that combination is genuinely useful. It charges by cable, so there is no battery platform to buy into.
See the Rechargeable Flat Flashlight with Green Laser at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
27. Milwaukee Rechargeable Pivoting Task Light with Spot and Flood Modes (2015R)
One light that does both spot and flood covers most of what you need in a shop. Spot mode throws light down a run, and flood mode lights the space you are standing in.
The small magnetic base sticks in tight spaces where a tripod light will not go. The head pivots a full 360 degrees and doubles as a kickstand when there is nothing to stick to.
Rechargeable means no battery pack hanging off the back and no added bulk. It is a good under cabinet and inside a cabinet light for install work.
See the Rechargeable Pivoting Task Light at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
New Milwaukee Outdoor Power Equipment for Lawn and Landscape Crews
28. Milwaukee M18 Self-Propelled Broadcast Spreader for Large Properties (3030-20)
Pushing a loaded hopper across five properties a day wears a crew out. The brushless motor propels this spreader so you are walking behind it instead of shoving it.
The drive system, weight distribution and handle design all work toward the same goal of reducing effort. It also holds a consistent application rate through the entire job.
Consistency is the part that saves money, because uneven passes waste product and cause callbacks. This one is aimed at lawn care crews rather than homeowners.
See the M18 Self-Propelled Broadcast Spreader at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
29. Milwaukee M12 Handheld Broadcast Spreader for Small Areas and Touch Ups (3330-21)
Hand crank spreaders take two hands and give you an uneven spread. This one runs a brushless motor, so one hand does the whole job.
Milwaukee claims best in class spread control and consistency across the full application. That matters most on small lawns, beds and repair patches where overspread shows up fast.
The reduced fatigue is the selling point if you run several properties in a day. It is the small companion to the self propelled unit above.
See the M12 Handheld Broadcast Spreader at Acme Tools Affiliate link. We may earn a commission at no extra cost to you.
Which New Milwaukee Pipeline 2026 Tools Are Worth Buying First
If you only buy one thing off this list, make it the M18 REDLITHIUM FORGE HD15 battery. It raises the ceiling on every heavy M18 tool you already own.
After that, the M18 TOP-OFF 350W Power Supply and the PACKOUT Hand Truck are the two that get used almost daily. The M18 FUEL 4 Gallon Wet/Dry Vacuum is the pick for anyone doing cleanup in a shop or a finished space.
The rest depends on your trade. Mechanics should look at the impact wrenches and the extended reach ratchet, and lawn crews should look hard at the self propelled spreader.
Not every Pipeline 2026 tool has shipped yet. Grab the ones that are available now.
Affiliate link. We may earn a commission at no extra cost to you.Want deals like these sent to you every day.
Join The Cut List, the free daily tool deal email from Matt.
Browse all current tool deals at 731woodworks.com.
See all tool reviews, every post from the 731 Woodworks blog.
Frequently Asked Questions
When do the new Milwaukee Pipeline 2026 tools come out?
Milwaukee staggers Pipeline releases across the following months instead of dropping everything at once. Some of these tools are already on shelves and others are still listed as coming soon. The fastest way to know is to check the live product pages, since stock dates move around. Anything you can order today will show a buy option at Acme Tools.
Is the M18 FORGE HD15 battery worth it over the HD12.0?
It depends on what you run. Milwaukee rates the HD15 at 50 percent more power than the HIGH OUTPUT HD12.0 and 25 percent more run time than the FORGE HD12.0 in the same size. If you are running a cut off saw, a rear handle circular saw or a demo hammer, that extra headroom matters. If you mostly use a drill and an impact driver, your money goes further somewhere else.
Will the new Milwaukee FORGE HD15 battery work in my older M18 tools?
Milwaukee has kept the M18 platform backward compatible since 2008, so an M18 pack fits M18 tools. The thing to watch is size and weight rather than fit, because a high capacity pack is heavy on a compact drill. It also will not make an older tool perform like a FUEL tool, since the tool electronics set the ceiling. Save the big packs for the tools that actually pull the current.
How cold does the Milwaukee M18 Rolling Fridge get?
Milwaukee rates the M18 30QT Rolling Fridge down to minus 4 degrees Fahrenheit with no ice required. That means the whole 30 quarts stays usable storage instead of half of it going to a melting bag of ice. It runs off M18 batteries and rolls, so it is built to move around a site. For shop use it doubles as a drink fridge you can wheel out to the driveway.
Does the new Milwaukee PACKOUT Hand Truck work with older PACKOUT boxes?
Yes, the PACKOUT Hand Truck uses the same mounting cleats as the rest of the PACKOUT system. Any PACKOUT box, crate or organizer you already own will lock onto it. It carries up to 400 pounds and rides on 10 inch flat free wheels, so it handles gravel and thresholds better than the standard rolling base. It also folds flat, which is the part people wanted.
Where can I buy the new Milwaukee tools from Pipeline 2026?
Acme Tools carries the new Milwaukee lineup and usually lists the new releases early. Not every Pipeline tool is available on day one, so a few will show as coming soon until Milwaukee ships them. Checking one retailer beats hunting across five sites and guessing at release dates. Use the shop link in this post to see everything that is live right now.
Prices and availability were accurate at time of publishing and may change. Always click through to confirm current pricing. Some links in this post are affiliate links. 731 Woodworks may earn a small commission at no extra cost to you.
