Save $189 on Milwaukee M18 FUEL Combo Kit, Now $369

A hammer drill and impact driver combo is the foundation of every cordless setup. Get those two right and everything else you add later builds on top of them. This kit is the top of Milwaukee's line, and it comes with three 5.0 Ah batteries, which is where the value really shows up. The Milwaukee M18 FUEL hammer drill and impact driver combo kit dropped from $558 to $369 at Home Depot, which is $189 off and about 34% off. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Milwaukee M18 FUEL 2 Tool Combo Kit for $369

Final Price Breakdown

• Regular price: $558

• Sale price: $369

• You save: $189

• Percent off: about 34%

• Includes: M18 FUEL 1/2 inch hammer drill (2904 20), M18 FUEL 1/4 inch hex impact driver (2953 20), three M18 REDLITHIUM XC5.0 batteries, M18 and M12 multi voltage charger, side handle, and BMC case

• Deal window: Limited time only

Why This Tool Is Worth It

Three XC5.0 batteries is the headline nobody should skip past. Most combo kits at this price ship with two, and a third 5.0 Ah pack on its own is a serious chunk of money. Having three means one is always charged, one is in a tool, and one is on deck, which is exactly how you avoid dead time on a long work day.

The tools themselves are FUEL, not the standard line. POWERSTATE brushless motors give the hammer drill the power to handle the widest range of applications of any hammer drill driver, and the impact driver delivers 2,000 in lbs of torque at up to 3,900 RPM with the fastest driving speed of any impact driver, without giving up control.

Size is a bigger deal than the spec sheet makes it look. The drill measures only 6.9 inches long and the impact is only 4.47 inches, so both fit between studs, inside cabinets, and into corners where a full size tool leaves you working at an awkward angle. Less length also means less fatigue overhead.

Control features round it out. Four mode drive control and ultimate trigger control give smooth acceleration on small fasteners so you are not stripping screw heads or blowing through trim. A mechanical clutch keeps driving consistent across different fastener sizes. Auto stop protects you from over rotation in a bind up, with a dedicated light on the foot of the tool that tells you when it kicked in. Hammer drill mode handles brick, block, and concrete, and single handed bit insertion keeps you moving.

Features

• POWERSTATE brushless motor delivers the power to complete the widest range of applications of any hammer drill driver

• POWERSTATE brushless motor delivers unmatched power for a full range of capability across the widest variety of applications

• Fastest driving speed of any impact driver without sacrificing power or control

• Drill is only 6.9 in. long for access into tight spaces and reduced fatigue

• Ultimate trigger control provides smooth acceleration for small fasteners to prevent stripping screws or damaging materials

• Fastest drilling and driving applications under load

• Auto stop feature protects from over rotation in a bind up, with a dedicated auto stop light on the foot of the tool to indicate a protection event

• Impact is only 4.47 in. for access in tight spaces

• 4 mode drive control

• 2,000 in lbs of torque

• Mechanical clutch for consistency in driving a wide range of fasteners

• Hammer drill mode for fast drilling into brick, block, or concrete

• Up to 3,900 RPM for the impact driver

• Single handed bit insertion for ease of use

• Includes one M18 FUEL 1/2 in. hammer drill (2904 20), one M18 FUEL 1/4 in. hex impact driver (2953 20), three M18 REDLITHIUM XC5.0 batteries, one M18 and M12 multi voltage charger, one side handle, and one BMC case

Who This Is Best For

This is a pro grade kit and it belongs in a working shop or a contractor's truck. Remodelers, framers, electricians, plumbers, and deck builders will use both tools every day, and the hammer drill mode covers anchoring into concrete and block without needing a separate rotary hammer for light work.

Woodworkers and cabinet shops get real value out of the compact sizes and the trigger control, especially for cabinet installs, jig building, and assembly work where stripped screw heads and blown out material cost you time and material.

Serious DIY homeowners planning bigger projects will find this the kit that carries them for years. If you already own M18 tools, the three batteries and multi voltage charger alone justify a lot of the price.

If you only need a light duty drill for occasional hanging shelves and furniture assembly, this is more tool than the job requires. This one is built for people who put it under load regularly.

Lock In the $369 Price Before This Kit Sells Out

Deal is limited time only while supplies last.

Know somebody who is still running an old drill and impact that will not hold a charge? Share this post with them before the price climbs back to $558.

Looking for more savings at Home Depot? Check out our permanent hub for deals at The Home Depot Deals Page for daily updates on Milwaukee, DeWALT, and more. We also track the best tool sales at Lowe's, Amazon, and Rockler.