Kobalt 7-1/4 Inch Sliding Miter Saw Deal: $149

A sliding compound miter saw that weighs under 23 pounds and costs $149 fills a gap most shops have. Lowe's has the Kobalt compact 7-1/4 inch single bevel sliding miter saw down from $199 to $149, which is $50 off through September 21, 2026. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab The Kobalt Sliding Miter Saw For $149

Final Price Breakdown

  • Regular price: $199

  • Sale price: $149

  • You save: $50

  • Percent off: 25%

  • Deal expires September 21, 2026

Why This Tool Is Worth It

The value here is in the combination of small blade and sliding action. A 7-1/4 inch saw without slides can barely handle a 2x4. Add a dual rail slide system and this one crosscuts a full 2x8 at 90 degrees and a 2x6 at 45, which covers trim, molding, framing lumber, shelving, and almost every board a home shop actually cuts.

Weight is the other half of the story. Under 23 pounds means one person can carry it from a shelf to a bench, out to a deck, or into a truck without a second set of hands. Most sliding miter saws land in the 40 to 60 pound range and end up permanently bolted to a stand. This one can live on a shelf and come out when needed, which is a big deal in a garage where floor space is the limiting factor.

The build quality is better than the price suggests. A die cast aluminum base and table gives real work support instead of flexing under a board, and tall aluminum fences hold crown and baseboard steady during setup. Linear bearings on the slide rails are what keep the cut smooth rather than chattery, and that shows up directly in cut quality on trim.

Practical details round it out. The 10 amp motor spins up to 5,000 RPM for clean cuts, the upfront LED cut line indicator shows exactly where the blade will land before you pull the trigger, and 9 positive stops with 50 degrees of miter left and right cover every common angle without hunting. It also bevels to 47 degrees left for compound cuts on crown and trim. For a shop that needs accurate crosscuts without giving up a corner of the garage, this is a lot of saw for $149. 💪

Features

  • Maximum crosscut up to 2 inch x 8 inch dimensional lumber at 90 degrees and 2 inch x 6 inch at 45 degrees

  • Ideal for molding and framing cuts

  • Upfront LED cut line indicator projects an accurate pre cutting line for precise alignment

  • Miter cuts up to 50 degrees left and right with 9 positive stops at the most used angles

  • Lightweight at under 23 pounds for easy transport from storage to work location

  • Powerful 10.0 amp ball bearing motor delivers up to 5,000 RPM

  • Large die cast aluminum base and table for increased work support

  • Bevel cutting up to 47 degrees to the left with positive stops at 0 and 45 degrees

  • Dual slide rail system with linear bearings for smooth and accurate operation

  • Tall die cast aluminum fences provide support during setup and cutting

  • 7-1/4 inch blade size and corded electric operation

Who This Is Best For

This is a strong fit for the small garage or basement shop that does not have room for a full size 12 inch saw on a permanent stand. Woodworkers building shop furniture, shelving, boxes, picture frames, and small projects will find the capacity plenty for the material they actually use, and the compact footprint means the bench stays usable.

It is also a good pick for anyone doing trim and molding work around the house. Baseboard, casing, quarter round, shoe molding, and chair rail all fall well within capacity, and the bevel plus miter range covers compound corners. The LED cut line helps a lot when you are working with prefinished trim where a bad cut costs money.

Handymen, remodelers, and anyone who works at different locations will appreciate the weight. A saw you can carry in one hand actually goes to the job instead of staying in the shop.

The limitation to know going in is capacity. If you regularly cut wide boards, 4x4 posts, or large crown, a 10 or 12 inch saw is the better tool. For trim, framing lumber, and everyday shop work, this handles it and stores away when you are done.

Lock In The $149 Miter Saw Deal At Lowe's

Share this post with someone who has been trying to squeeze a miter saw into a tight garage shop.

Never miss a sale at Lowe's! Visit our updated Lowe’s Tool Deals Hub to see every current offer in one place. You can also compare these prices against our other major tool guides for The Home DepotAmazon, and Rockler.

Previous
Previous

25% Off Rockler Juice Groove Routing Jig: $59.99

Next
Next

Kobalt 24V Impact Wrench Deal: $149, Save $80