Jorgensen 6" Bar Clamps 4 Pack Deal: Save 24%

Amazon has the Jorgensen E-Z Hold 6 inch light duty bar clamps down to $25.19 for a 4 pack, which is 24% off the regular $32.99. That works out to about $6.30 per clamp, and clamps are the one shop item where nobody has ever complained about owning too many. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

Grab the Jorgensen 4 Pack for $25.19 on Amazon

Final Price Breakdown

• Regular price: $32.99

• Sale price: $25.19

• Total savings: $7.80

• Percent off: 24%

• Price per clamp: about $6.30

• Deal ends: limited time only

Why This Tool Is Worth It

Small clamps do the work that big parallel clamps cannot. Holding a stop block to a fence, pinning a jig to a workbench, keeping a small glue up square, tacking a fence to a router table, holding a workpiece for sanding. These are the jobs that come up constantly, and reaching for a $60 parallel clamp to hold a stop block is a waste of a good clamp.

The E-Z Hold design is what separates these from basic trigger clamps. The head reverses so each clamp becomes a spreader, which is the tool you want when you are pulling apart a dry fit or pushing a bowed board back into line. Even better, two clamps can be joined together to more than double the opening capacity, so a 4 pack quietly gives you the option of a much longer reach when you need it.

One handed operation matters more than the spec sheet suggests. When you are holding a workpiece in place with one hand and the glue is already tacking up, you need to clamp without letting go. The inline advancing handle gives you more travel per squeeze, so you close the gap fast instead of ratcheting twenty times. With a 200 lbs load limit and a 2 3/8 inch throat depth, these hit the sweet spot for light duty work where you want holding pressure without crushing your workpiece.

At this price, buying two packs to have eight of them on the wall is an easy call.

Features

• E Z Hold design converts from clamp to spreader

• Two clamps can be joined together for more than double the opening capacity

• One handed operation with patented sliding head

• Clamping force up to 300 lbs with the sliding head design

• Normal load limit of 200 lbs

• Maximum opening capacity of 6 inches

• Throat depth of 2 3/8 inches from bar to top of pad

• Bar is 1/8 inch by 1/2 inch plated round edge high carbon steel

• Advancing handle made of glass filled nylon

• Soft and durable plastic pads protect the workpiece

• Inline advancing handle for greater travel per squeeze

• 4 pack

Who This Is Best For

These belong in the hobby shop and the garage woodworking setup where space and budget are both tight. If you are building jigs, cutting on a track saw, doing small glue ups, or setting stop blocks at the miter saw, this is the clamp size you will use the most.

They also make sense as a second tier of clamps in a bigger shop. Nobody wants to tie up their heavy parallel clamps holding a fence to a table saw or a template to a workpiece for routing. A handful of these light duty clamps on a wall rack keeps the good clamps free for actual glue ups.

For beginners building a first clamp collection, a 4 pack at this price is one of the better entry points. Clamps are the item most new woodworkers underbuy, and small versatile ones like these get used on almost every project. 👍

Claim the 24% Discount on Amazon Now

This is a limited time price and Amazon deals like this can end without notice. Know a woodworker who is always borrowing clamps? Share this post with them.