DEWALT 60V TrackSaw Kit Deal: $100 Off, Now $479

The DEWALT 60V MAX 6 1/2 inch cordless TrackSaw kit drops to $479 when you use code DEWALT100 at checkout, down from $579. That's $100 off a track saw that runs on a battery, which puts sheet goods breakdown within reach without dragging a cord across the shop floor. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!

⚠️ Prices valid at time of posting but are subject to change at anytime.

👉 Grab the DEWALT TrackSaw Kit With Code DEWALT100

Final Price Breakdown

• Regular price: $579

• Discount: $100 off with code DEWALT100

• Final price: $479

• Savings: about 17% off

• Code required: DEWALT100 at checkout

• Expires: September 30, 2026

Why This Tool Is Worth It

A track saw solves the problem every woodworker runs into eventually. Full sheets of plywood are heavy, awkward, and dangerous to wrestle across a table saw by yourself. With a track saw you bring the tool to the material instead, lay the track down, and get a factory quality edge on the first pass. No outfeed table, no helper, no fighting a 4x8 sheet.

The zero clearance cutting system is what makes those cuts clean. The track supports the material right at the cut line, so you get straight, splinter free edges on both sides of the blade. On cabinet grade plywood or veneered panels, that's the difference between an edge you can glue up and one you have to trim again.

Going cordless on a 60V platform changes how you use it. You can break down sheets in the driveway, on a job site, or anywhere the material happens to be sitting, and the brushless motor still pushes through hardwood up to 2 1/8 inches thick. Add the riving knife, the anti kickback mechanism, and 90% dust collection through the vacuum port, and it's a safer and cleaner way to work than most alternatives.

Features

• Zero clearance TrackSaw cutting system delivers precise, straight, splinter free cuts

• For use with TrackSaw dual edged tracks for perfectly straight cuts in both directions

• On track cut depth: 2 1/8" (54mm) at 90; 1 5/8" (41mm) at 45

• Brushless motor effortlessly powers through hardwoods up to 2 1/8 in. thick

• Continuous anti kickback mechanism and riving knife prevent kickback when engaged

• Straight plunge mechanism for optimal ergonomics

• Low profile blade guard allows saw to be used in confined spaces

• Universal 1 1/4" dust port for 90% efficient dust collection with vacuum

• 60V MAX cordless platform

• 6 1/2 inch blade

• Sold as a kit

Who This Is Best For

This belongs in any shop that works with sheet goods. Cabinet builders, furniture makers, and anyone building built ins will get the most out of it, because breaking down plywood accurately is the first step in almost every one of those projects. The cut quality is good enough that a lot of people stop trimming panels on the table saw entirely.

It's also a strong fit for the small shop that does not have room for a big table saw with a full outfeed setup. If your saw lives in a one car garage and every sheet turns into a two person job, a track saw takes that headache off the table completely. Store it on a shelf, pull the track out when you need it.

Contractors and remodelers should look hard at the cordless part. Cutting doors to width, sizing countertops, trimming panels on site, all of it gets easier when the tool goes where the work is and does not need an outlet. If you already run DEWALT 60V or 20V MAX batteries, you're that much further ahead.

👉 Get the DEWALT 60V TrackSaw Kit for $479

Know someone who's still fighting full sheets of plywood on a table saw by themselves? Share this post with them before the code expires.

Never miss a deal at Acme Tools! Visit our updated Acme Tools Hub to see current deals all in one place. Check out our other deal hubs at The Home Depot, Amazon, and Rockler.