DEWALT 20V MAX GRABO Lifter Deal: $199, Save 23%
The DEWALT 20V MAX GRABO Lifter just dropped from $259 to $199, which is 23% off and $60 in savings on a tool that turns a two person lift into a one person job. This is the bare tool version, so it runs on the 20V MAX batteries you already own. If you have ever wrestled a sheet of plywood, a slab of stone, or a full sheet of glass by yourself, this is the tool that makes that fight disappear. This post contains affiliate links, which means I may earn a small commission if you buy through them—at no extra cost to you. It helps keep the tool deals coming, so thanks for your support!
⚠️ Prices valid at time of posting but are subject to change at anytime.
Final Price Breakdown
Regular price: $259
Deal price: $199
You save: $60
Discount: 23% off
Expires: Limited time only
Why This Tool Is Worth It
A vacuum lifter is one of those tools that sounds like a luxury right up until the first time you use one. With a lift load capacity of up to 265 lbs. max, the GRABO grabs onto material and gives you a solid handle where there was not one before. Plywood, MDF, drywall, countertop slabs, pavers, glass, and tile all become manageable because you finally have something to hold onto instead of pinching an edge and hoping.
What separates this from a basic suction cup is the built in pressure sensor. The pump automatically kicks back on to maintain vacuum suction, so you are not watching a manual cup slowly bleed off pressure while you are carrying something expensive. The color LED control screen and digital pressure gauge tell you exactly where the load capacity sits and what mode the tool is running in, and an audio alarm warns you when the battery is getting critically low. That combination is the difference between guessing and knowing.
It also handles surfaces that give ordinary cups trouble. The GRABO works on a wide range of non porous and semi porous materials, including rough textured surfaces, which opens it up to concrete pavers, textured stone, and finished lumber rather than just glass and polished tops.
For heavier work, four metal lift strap attachment hooks let you rig lifting straps to the unit, so two people can move seriously heavy material with real control. Maintenance is simple too. The foam rubber vacuum seal is quick to replace, a protective seal cover is included for storage, and a sun shade accessory helps you actually read the screen when you are working outside in direct sunlight.
At $199 for a tool that saves your back and prevents dropped material, the math works out fast.
Features
Bare Tools are sold without batteries or chargers, making them ideal for users who already own compatible power sources. However, if you do not already have the required battery and charger, you must purchase them separately.
High load capacity: lift heavy materials with a lift load capacity of up to 265 lbs. Max
Versatile performance: work with a wide range of both non porous and semi porous materials including rough textured surfaces
Built in pressure sensor: confidently take on applications with the built in pressure sensor that automatically engages to help maintain the vacuum suction
Bright LED control screen: stay in control with a color LED screen and digital pressure gauge that communicates load capacity and operational mode
Audio alarm: be alerted when battery charge reaches critically low levels
Lift strap attachment hooks: lift and load this unit with 4 metal hooks that allow for use of lifting straps (strap sold separately)
Convenient maintenance: quickly replace the foam rubber vacuum seal and utilize the protective seal cover (included) when in storage
Visibility in sunlight: help visibility in direct sunlight with the included sun shade accessory
Who This Is Best For
This belongs in any shop where sheet goods move through the door on a regular basis. Cabinet shops handling full sheets of plywood and melamine get the most obvious benefit, especially one person operations where there is nobody around to grab the other end. Getting a sheet from the rack to the table saw or track saw setup without scuffing a face or blowing out a corner is worth the price by itself.
Countertop fabricators, tile setters, and stone installers are the other natural fit. Slabs and large format tile are heavy, awkward, and expensive to drop, and a vacuum lifter gives you a controlled grip on material that has no good handhold.
Beyond the shop, glaziers, flooring crews, hardscape installers, and door and window installers will all find work for it. Home shops running a solo woodworking operation should look at it as a safety tool as much as a productivity tool, because the alternative is muscling sheet goods around alone and hoping nothing slips.
Just remember this is a bare tool, so you need a DEWALT 20V MAX battery and charger to put it to work.
💪 Check current pricing on the DEWALT GRABO Lifter here
Know somebody who moves plywood or slabs by themselves? Share this post with them before the price climbs back up.
Never miss a deal at Acme Tools! Visit our updated Acme Tools Hub to see current deals all in one place. Check out our other deal hubs at The Home Depot, Amazon, and Rockler.
Current RYOBI savings at The Home Depot, sorted by budget, battery platform, and category. Updated regularly.